AUSTRALIAN MODEL RAILWAY BUILDINGS, STRUCTURES and ACCESSORIES

SECTION 8

Parts


Cast deck

Plastic milled chassis

Brass etch headstock

Decals


The modeller requires a Steam Era Models 10ft 6" undercarriage kit to complete this kit.

K Wagon 10ft 6"

Identify the Chassis and identify the top and underside of the chassis. Take the sideframes from the SEM kit . Place the chassis deck side down on a firm work area. Place the sideframe adjacent at the side of the chassis. Check the length against each part. Some sanding or filing may be required. When satisfied glue into position keeping the sideframe square to the chassis. Repeat. Add the under detail you require as per SEM instructions. Identify the brass etch headstock. Position the headstock adjacent to the end of the chassis flush with the deck. Glue when satisfied. Repeat


Paint


Paint the cast deck part. Then position onto the chassis assembly. When satisfied glue into position.


Decal as per online photographs.